7
NEW GOLIA PLUS User Manual_
May 2013 Edition
Commencing operation
Correct use
Keep hands and clothing away from moving mechanical parts.
The work area is protected with the base frame.
Instructions for assembly following transportation
To assemble the machine following transportation proceed as follows:
1. Remove the handle unit and motor unit from the packaging.
2. Rest the base of the handle on the base frame lining up the relevant holes.
3. Using the 4 VTCEI M8x30 screws secure the lower part of the handle unit to the base frame, keeping the
electric cable box turned towards the operator.
4. Connect the plug at the back of the machine body to the socket on the handle electric box.
CAUTION
Keep the handle vertical with respect to the motor base frame to facilitate its assembly.
HAZARD
Using the machine when not fully assembled may cause injury or damage to people or
objects. Do not use the machine when it is not fully assembled. Keep all fittings tightly
closed. Maintain machine settings in accordance with the specifications.
Instructions for electrical connection
CAUTION
This machine only operates with the voltage and frequency shown on the machine data
plate. Before connecting the cable to the power supply ensure the correct voltage and
frequency are available
.
HAZARD
Exposing the machine to water or rain may cause death due to electrocution. Keep the
machine in a dry building.
WARNING
If the machine is not connected correctly to the electricity network death due to
electrocution may occur. To prevent electric shocks always use a three wire electrical
system connected to earth. For maximum protection against electric shocks use a
circuit protected with a differential cut-out switch.
WARNING
Tampering with the earthing plug in any way may result in death from electrocution. Do
not cut, remove or break the earthing plug. If the socket does not match the plug
consult a qualified electrician.
WARNING
Do not use the machine if the switch malfunctions.
HAZARD
If the machine is used with a damaged plug or power supply cable death may occur
from electrocution. If cables or plugs are worn or damaged in any way, have them
replaced by the manufacturer or the K&T technical support service or similarly qualified
person, in order to prevent risks to safety.
All manuals and user guides at all-guides.com
