13
NEW GOLIA PLUS User Manual_
May 2013 Edition
Preparing to start the machine
WARNING
Only use accessory and abrasive discs recommended by the sander manufacturer, and
which are suitable for the required sanding procedure.
6. Bring the machine back to the vertical
position by resting the accessory disc
on the surface to be sanded.
7. Locate the power supply. The socket
must be compatible with the plug.
8. Connect the plug to the socket.
9. Keep the cable away from the pathway
of the machine.
Starting the machine
To start the machine proceed as follows:
1. Lift the black release lever with both hands and turn the handle downwards.
2. Keep turning the handle until it locks automatically and clicks into the required position.
3. If the handle position is too high for the operator repeat the previous operation until it clicks into the next
available sanding position.
4. Holding the hand grip firmly press the enabling
button on the upper end of the handle.
5. Keep the enabling button pressed.
6. Start the machine by pressing the red switch
levers, on either the left or right.
7. Release the enabling button.
All manuals and user guides at all-guides.com
