9
Figure 6: ATV Tongue Assembly
OPERATIONS AND ADJUSTMENTS
This safety alert symbol is used to indicate safety instructions. Follow
these instructions to avoid personal injury and/or property damage.
Read and follow all instructions in this manual and the attached engine
manual.
Do not allow anyone to operate this equipment who has not fully read and
comprehended the safety manual and who has not been properly trained in the safe
operation of the equipment.
Operator should be familiar with all functions of the unit.
A.
INTENDED USE
This mower is intended for use behind an ATV, UTV (utility vehicle / side-by-side) or small tractor
to cut grass, weeds, brush and saplings up to 2
”
in diameter.
B.
TONGUE CONFIGURATIONS AND ADJUSTMENTS
Shut off the engine and allow the mower blades to come to a complete stop before
adjusting the tongue.
The hitching system is designed so that the rough cut mower can be pulled directly behind a tow
vehicle or offset to the left or right
. See Figure 7.
Wire Lock Section of
Wire Lock Pin
(Placed Back From
Direction of Travel)
5/16” Wire
Lock Pins
Direction of Travel
Screw Pin Shackle
Clevis
Tongue
Shift Tongue Left or Right
Between Holes
Summary of Contents for AcrEase MR44B
Page 2: ...2 ...
