Installation Instructions
Safety information
cRIO PN-Installation-V0.3/12.05.2017
1
Business Confidential/
Proprietary
1 Safety information
WARNING:
Disregarding
this
warning may result in damage to
equipment and/or serious personal
injury. Only qualified personnel may
start up and operate this device.
According to the safety instructions in
this text, qualified personnel are
persons who are authorized to start
up, to ground, and to mark devices,
systems, and equipment according to
the standards of safety technology.
In addition, these persons must
be
familiar with all warning instructions
and
maintenance measures in this
text.
WARNING:
The
cRIO
PN
is
designed
exclusively
for
PELV
operation according to EN 60950/EN
60204/VDE 0805-1. Only protective
extra-low voltages according to the
defined standards may be used to
supply.
Shielding
The shielding ground of the
connected twisted pair cables is
electrically connected to the female
connector. When connecting
network segments,
avoid ground loops, potential
transfers, and voltage equalization
currents via the braided shield.
i
NOTE: Electrostatic discharge!
The device contains components that
can be damaged or destroyed by
electrostatic discharge. When
handling the device, observe the
necessary safety precautions against
electrostatic discharge (ESD), in
accordance with
EN 61340-5-1 and EN 61340-5-2, as
well as
IEC 61340-5-1 and IEC 61340-5-2.
i
Housing
Only staff authorized by
KUNBUS
is
permitted to open the housing.