Kuka VisionTech 2.1, Manual

Page: 35 / 109

35 / 109 Issued: 11.10.2013 Version: KST VisionTech 2.1 V1
8 Installation and licensing
5. Press
...
, select the received licensing file and confirm with
OK
.
6. Reboot the robot controller.
8.4.2 Repairing the license
Description
If hardware components are modified, added or exchanged, this may invali-
date the license. A license becomes invalid if the current signature of the con-
trol PC differs too greatly from the saved signature. In this case, the license
can be repaired.
Procedure
1. In the main menu, select
VisionTech
>
Licensing
.
2. In the list of currently installed licenses, select the license to be repaired.
3. Press
Create repair request
and select a directory. A file is generated in
the selected directory.
4. Send the generated file to VisionTech@kuka-roboter.de. KUKA Service
will use this to create a new licensing file and send it to you.
5. Press
...
, select the received licensing file and confirm with
OK
.
6. Reboot the robot controller.
8.4.3 Activating an emergency license
Description
It is possible to activate an emergency license. A total of 5 emergency licenses
are available. An emergency license is valid for 3 days. On expiry, emergency
licenses cannot be reactivated. For this reason, they should only be used in
an actual emergency.
Procedure
1. In the main menu, select
VisionTech
>
Licensing
.
2. Select the
Activate emergency license
tab.
3. Press
Activate next emergency license
.
4. Reboot the robot controller.