Back to TOC
KUKA Connect Connectivity Guide
17
Issued: 9.10.2018
Version: 3.2
Many repairs may only be done by a certified service technician. You should perform only
simple troubleshooting steps as directed by online or telephone support personnel. Your
warranty does not cover any damage due to unauthorized service.
All slots in the system must be populated at all times either with a module or with a blank card
to ensure proper cooling of the system.
To deploy the hardware in a dual network with DHCP server for WAN and LAN or a combined networking
setup (1 network):
Note:
The deployment instructions assume one fogNode and one fogLet.
1. Plug an Ethernet cable from your LAN switch into the S0 port on the fogNode.
Note:
Data is collected via the KLI ports of your KUKA robots. Please ensure the fogNode’s S0 port
is on the same network as your robots’ KLI ports.
Note:
Each fogLet can communicate with a robot network, 20 robots, and one internet network.
Figure 5.
Ethernet cables plugged into the fogNode for deployment.
2. Plug an Ethernet cable from the WAN network into the E0 port on the fogNode so it can
communicate with the cloud.
Summary of Contents for Nebbiolo NFN 300 Series fogNode
Page 1: ...Connectivity Guide...
