Kuhnke KDT 633, Instruction Manual

Page: 43 / 58

4 - 11
Display control
Deactivate cursor marker
Hex 1Bh 2Eh 30h
Decimal 27 46 48
ASCII ESC . 0
Usually, the current cursor position is shown on the screen by a
marker. With this command, the marker display can be sup-
pressed.
Activate cursor marker
Hex 1Bh 2Eh 31h
Decimal 27 46 49
ASCII ESC . 1
This command makes the cursor marker visible.
4.1.4. Text display (possible only with KDT 635)
Depending on the memory configuration, the screen memory of
the KDT 635 can store up to 4 screens simultaneouly between
which can be switched instantaneously (without a new screen
creation by the host computer). Each screen has its own cursor
position and its own current character attribute. All of the
screens can be operated separately in 2 different display modes.
Select screen for display
Hex 1Bh 4Dh PAGE NP 3Bh
Decimal 27 77 PAGE NP 59
ASCII ESC M PAGE
NP
;
The parameter PAGE contains the number of the screen to be
selected for display. The pages are numbered successively,
starting at zero.
After switching the terminal on, page 0 is selected