- 17 -
ADAPTING TO THE TRACTOR
In the area around the 3-point hitch an operator or bystander can easily be pinched or
trapped.
Ensure that there is nobody in this area when operating the lifting mechanism.
-
WMU
shredders can be offset to the side : place the machine in the required offset position (see page 18).
During transport, lock the tractor lift arms in order to avoid any side movement.
- Fix the hitch pins (D) in place as well as the lynch
pins (S) :
. in the oblong holes (A) : mobile position
. in the round holes (F) : fixed position
- Top link : It is essential to use the pivoting con-
nection made up of the 2 brackets (M) fixed on the
machines attachment frame. A good setting is an
angle of 45° downwards compared to the frames
axis (see drawing).
- Connect up the PTO shaft. Prevent the protector from
rotating using the chains designed for this.
- Raise the parking stand and lock it using pin (F)
and spring cotter pin (S) (see figure on page 16).
Important :
Machine is correctly attached when horizontal in the
working position. To do this, adjust the top link (P)
length.
