- 14 -
- When the roller has been placed in the correct
position to give the desired working height, replace
the pin (P) in its corresponding position.
- Retighten screw (V).
Note
: When the pin is placed in the lower hole, the
ground/machine distance (i.e. shredding height)
is greatest.
Roller position with respect to the rotor
Choose the hole (A) or (B) for the side roller mounting
arms to ensure that the roller is as close as possible
to the hammer knives.
- Replace the larger slider and lock it in position using
R-clip (C).
Adjustment of the rear cover
The opening/closing of the rear cover (A) is adjustable
in 3 positions. To adjust, remove the bolt (F) and pivot
the cover until the required fixing hole (P) is in line with
the hole in the side-plate. Replace the bolt (F) with its
washer, and tighten the nut.
When adjusting the machine to shred close to the ground, fix the side roller mounting arms
in holes (B) to avoid any risk of contact between the hammer knives and the roller.
