Safety
SpeedRake
SR108 SR110 SR112
7
2. Safety instructions
Read and follow the safety instructions
Before using the machine, carefully read all the safety
instructions in this manual and the warnings placed on
the machine. Failure to follow the instructions contained
in this manual could result in product or property
damage, severe personal injury, or death. All applicable
safety procedures, codes and requirements of any
federal, provincial, state and local agencies, as well as
safe working practices and good judgment, must be
used by personnel when assembling, servicing,
adjusting or operating this equipment.
Before starting work, the operator must be familiar with
all machine controls, handling devices and their
functions. It is too late to learn once work has been
started!
Never let anyone operate the machine who is not trained
to do so.
Should you have any difficulties in understanding any
parts of this manual, please contact your KUHN dealer.
Safety shutdown procedure
Before leaving the tractor or before adjusting,
maintaining or repairing the machine, depressurize
hydraulics, turn off the engine, remove ignition key,
apply parking brake and wait until all moving parts have
come to a complete stop.
Introduction
The machine must only be operated, maintained and repaired by qualified persons who are familiar with the
machines' operation and understand safety regulations and procedures for preventing accidents.
The operator must follow the safety instructions in this manual and in the warnings posted on the machine. The
operator is also obliged to respect current legislation concerning accident prevention, work safety and public
traffic circulation.
The intended use of the machine includes following all operation, maintenance and repair recommendations
given by the manufacturer, and using only genuine spare parts, equipment and accessories, as recommended
by the manufacturer.
The manufacturer is not held liable for any damage resulting from machine applications other than those
specified by the manufacturer. Any use other than the designated operation is at the risk and responsibility of
the operator.
The manufacturer is not held liable for any damage or accident resulting from machine modifications carried out
by the operator himself or by a third party without previous written agreement from the manufacturer.
