KUHN PRIMOR, Instruction Manual

Page: 47 / 54

47
After 1
hour
After
50
hours
Every
50
hours
Every
100
hours
After
500
hours
Every
500
hours
Every
1500
hours
Every
2000
hours
or
every
year
Tighten wheel bolts (100 N.m)
X X
Tighten drawbar eyebolts
X X
Grease gate joint X X
Grease swivel chute bearing X X
Grease axle joint X X
Grease chute rams X X
Grease gate rams X X
Grease chute ram join X X
Grease axle rams X X
Grease beater bar bearing
X X
Grease drive chain (STD)
X X
Grease conveyor shaft bearing
X X
Grease parking stand
X X
Change conveyor reduction gear oil X X
Change gearbox oil X X
Change hydraulic unit oil X X
Change hydraulic unit filter cartridge X X
Check conveyor chain tension X X
Check conveyor reduction gear oil level X X
Check gearbox oil level X X
MAINTENANCE SCHEDULE
Beware! The schedule indicated below has been calculated for normal conditions of use. If the
working conditions prove more difficult, grease more often.
PTO shaft: for the maintenance period, refer to the instructions supplied with the PTO shaft.