KUHN PRIMOR, Instruction Manual

Page: 50 / 54

50
PROBLEMS POSSIBLE CAUSES WHAT TO DO
Turbine rattling when PTO engaged Clutch slipping
intermittently
. Gradually engage the PTO to a suitable
speed. If your machine is equipped with a
free-wheel drive shaft and your tractor with a
hydraulic PTO clutch, refer to your dealer
(problem with progressive clutch rate
irrespective of tractor engine speed).
Clutch movement too slow or
impossible Flow limiters not open
enough . Adjust flow limiters (see Description of
Controls section).
Machine empty or
nearly empty and
discharge conveyor
running Stop conveyor to manœuvre chute.
Clean and grease the swivel chute.
Chute movement too quick Flow limiters open too
far . Adjust flow limiters (see Description of
Controls section).