6. - Putting into service
HR3004D-3504D
43
KN207JGB_D
Power harrow
• Category 3 linkage (b):
• L= 965 mm (3’03’’) (approximately).
This position must be used when the power
harrow is used in combination with a seed
drill.
- Position ball joints of tractor lower links in line with
holes of machine lower yokes.
- Insert lower hitch pins and secure them with lynch
pins.
- Attach top link with hitch pin.
- When the tractor is fitted with a standard 3 point
attachment category 2, use category 2 upper
hitch pins (Factory supplied).
- When the tractor is fitted with a standard 3 point
attachment category 3, use category 3 upper
hitch pins (Available as spare part).
- Use tractor and machine attachment holes to
adjust the top link position.
To obtain optimum PTO shaft angles and
tractor lift capacity, the top link must be
parallel to the lower links or slightly pointing
downwards towards the tractor.
L
b
