KUHN GMD802 Series, Operator'S Manual

Page: 25 / 72

Putting into service
Disc mower
GMD802
23
$ Putting into service
1. Description of control elements
The machine is fitted with a release cord operated from
the tractor cab.
The machine is supplied with an 18 mm box wrench (1)
to carry out certain adjustment and maintenance tasks.
2. Coupling and uncoupling
The machine adapts to tractors fitted with a 3 point
linkage category 2.
„ Description of coupling elements
- A PTO shaft 1 3/8’’ - 6 splines.
- A check chain.
- A release cord.
- Two hydraulic hoses which control the machine
transport/work position setting.
- One hydraulic hose which controls the machine
headland turn position setting.
- A 7-pin electric plug for the electrical signalling
equipment.