KUHN GMD802 Series, Operator'S Manual

Page: 37 / 72

Putting into service
Disc mower
GMD802
35
„
Uncoupling the machine
- Place the machine in transport position.
- Lower parking stand (1).
- Secure parking stand using lock (2).
- Lower the mowing unit on the ground using mowing
unit lift cylinders.
- Shift the mowing unit lift cylinder directional control
valve in float position.
- Lower the tractor three-point linkage to rest the
machine on the ground.
- Uncouple and place PTO shaft in support (1).
- Disconnect and store hydraulic hoses on holder (2).
- Disconnect and store 7-pin plug in its holder (3).
- Detach the top link from the machine end.
- Release the lower links.
- Lower the tractor three-point linkage.
The machine is uncoupled.
For tractors not fitted with a hydraulic
position control function, unhook and attach
check chain to its support.