
Disc mower
30
GMD350 - 350-FF
Putting into service
Preparing the machine
Positioning of lower links
- Measure dimension E.
- Adjust tractor lower link stabilizers to measure E =
50 mm (2").
Linkage adjustment
- Measure dimension A.
If measure A is below 2.10 m (6’11’’):
- Place lower links in position a:
Adjust machine lower hitch pin position:
- Loosen the 8 screws (3).
- Position hitch pin (1) at measure F = 10 mm (0.4").
- Tighten 4 hitch pin screws (1).
• Torque : 12 daN m (89 lbf ft).
- Position hitch pin (2) at measure (X = 825 mm (2’8").
- Tighten 4 hitch pin screws (2).
• Torque : 12 daN m (89 lbf ft).
E
A
X
F
Summary of Contents for GMD350
