KUHN GMD350, Operator'S Manual, Page: 31 / 100

Putting into service
Disc mower
GMD350 - 350-FF
29
„
Preparing the tractor
-
-
The tractor PTO stub must rotate at a speed of 540 min
-1
.
or
Check that the tractor's authorized gross
weight as well as its lift capacity and
maximum weight per axle are not exceeded.
The front axle load (1) must never, under any
circumstances, be less than 20% of the
tractor's unladen weight. Add ballast weights
to the front in order to preserve the steering
and braking efficiency.
The tractor must be fitted with lower link
stabilizers.
When the following equipment is fitted:
Mechanical safety r Hydraulic pivot
The tractor must be fitted with a double acting
hydraulic outlet with float position.
When the following equipment is fitted:
Mechanical safety release
The tractor must be fitted with a single acting
hydraulic outlet with float position.