- 13 -
5. Assembly of belt shields and belt
- Install the inner belt shield (D) (photo F) in place and
secure with the 3 spacer bolts (E). Do not forget to
insert a flat washer (dia. 13 x 30 x 5) between each
spacer bolt and the inner belt shield.
- Install closing cover (F) equipped with 2 clamp nuts
using 2 underserrated self-locking screws (O) (M 8
x 12) as shown in photo G.
- Install belt (G) (photos F and G) on pulleys and
tension it following instructions on page 31.
- Attach outer belt shield (N) with 3 self-locking nuts
(I) (M 12) and 3 conical spring washers and install
underserrated self-locking screw (P) (M 8 x 12)
(photo H).
6. Outer swath wheel assembly (photo I)
- Attach swath wheel assembly (U) to outer skid shoe
with 2 cup square bolts (V) (M 12 x 35), 2 conical
washers (dia. 13 mm) and 2 self-locking nuts (M 12).
Torque : 8.5 daNm/65 ft.lbs.
Before tightening the screws (V), check that the
swath wheel does not touch the cone cover or the
blades.
Keep to a distance of
X = 15 to 25 mm - 3/5" - 1".
I
All manuals and user guides at all-guides.com
Summary of Contents for GMD 801
