- 5 -
5.If a primary PTO shaft is equipped with a slip clutch or a free wheel, these must be fitted on the machine PTO.
6.Ensure that PTO shaft is always correctly fitted and locked into place.
7.Make sure guards are correctly in place and secured with the safety chains provided.
8.Before engaging PTO, ensure that PTO speed
(rotational frequency)
and direction are in accordance with
manufacturer's recommendations.
9.Before engaging PTO, keep all people and animals clear from the machine.
10.Never engage PTO shaft when tractor motor is turned off.
11.Never surpass the PTO angle recommended by the manufacturer.
12.WARNING ! Rotating elements can continue turning momentarily after PTO is disengaged.
Keep clear until all
rotating elements are at a standstill.
13. When removing the machine, place PTO shaft on the supports provided.
14. Fit the safety cap on tractor PTO.
15. Replace any worn or damaged PTO guards immediately.
HYDRAULIC SYSTEM
1.WARNING ! Hydraulic system is under pressure.
2.When fitting hydraulic motors or cylinders, ensure that connections have been made correctly, as per
manufacturers instructions.
3.Before connecting hoses to the tractor hydraulics, ensure that tractor and machine circuits are not under
pressure.
4. It is strongly recommended that the operator marks the hydraulic connections between tractor and machine to
avoid making a wrong connection. WARNING ! Functions could be reversed (for example : lift/lower).
5.Check hydraulic hoses regularly ! Worn or damaged hoses must be replaced immediately.
Replacement parts must be in accordance with manufacturers recommendations concerning specifications and
quality.
6.Should a leak be found, take all necessary precautions to avoid accidents.
7.Any liquid under pressure (particularly oil from hydraulics) can penetrate the skin and cause severe injury. If
injured, see a doctor immediately, there could be danger of infection.
8.Before any adjustments, maintenance or repairs are carried out, lower the machine, depressurize the circuit,
turn off the engine and remove ignition key.
Rotation speed ... rpm (American Measure) is also expressed in metric measure :
Rotational frequency
...
min
-1
. Both
units are equivalent, for example : Rotation speed 540 rpm equals
Rotational frequency 540 min
-1
.
All manuals and user guides at all-guides.com
Summary of Contents for GMD 801
