KUHN GA4121GM, Operator'S Manual

Page: 19 / 88

4. - Safety
GA4121GM
17
KN129DGB D
Gyrorake
4.2.8 Precautions during manoeuvres
When moving the machine from the transport
position to the working position and vice versa,
make sure that nobody is within the machine
pivoting area.
4.2.9 Remote controlled components
Danger of crushing and shearing can exist when
components are operated by hydraulic or pneumatic
controls. Keep away from these danger zones.
4.2.10 Tyres
Regularly check the tyre pressure. Respect
manufacturers' recommendations on pressure.
Assembly, disassembly and repair of wheels and
tyres must only be carried out by competent persons
who are equipped with standardized tools. Before
any work is performed on the wheels, ensure that
the machine rests on the ground and is perfectly
stable so that it cannot move accidentally (put
chocks in place).
4.2.11 Safety decals
Safety warning decals are placed in pictorial form on
various parts of the machine. They are there to warn
you of potential dangers and to tell you how to avoid
accidents.
Always keep the safety decals clean and readable,
and replace them when they are worn, damaged,
missing or illegible.