KUHN GA 8001 H, Assembly And Operators Manual

Page: 30 / 52

- 28 -
The GA 8001 H Gyrorake can be fitted to all tractors with a standard three-point linkage Cat. 2 or 3 and a power
comprised between 51 and 74 kW (70 and 100 hp).
The swivel hitch is equipped with two attachment yokes (1) to be connected to the tractor lower links (2)
(photo 11).
Attachment should always be made within yokes (1). Two bushes (diameter 37 mm / 1 1/2") are supplied with
the machine for attachment to Cat. 3 tractors.
Always make sure the tractor lower links are immobilized using the means provided (check chains, etc...)
It is very important that the tractor lower links (2) are horizontal and that the the lower hitch pins are set at approx.
600 mm / 2' above ground level (see distance A ). This distance may be set permanently using the optional
check chain kit.
Connect hydraulic hoses (3) and electric plug (4) of the light and signal system (photo 11). To do this a double
acting outlet and a 7-pin electric socket at the rear of the tractor are required.
When the machine is attached to the tractor, retract the parking stand (5) in its housing (see arrow) and lock it
with the locking handle (6) (photo 11). 2 handles have been welded on the parking stand (5) to ease its handling.
ATTACHMENT
1) FITTING TO THE TRACTOR