KUHN GA 4511 GM, Assembly & Operators Manual

Page: 26 / 40

- 24 -
PARKING
ALWAYS PARK THE MACHINE ON EVEN, FAIRLY LEVEL GROUND.
The GA 4511 GM is equipped with a parking stand (N) so that the machine can be parked when in the work or transport
position.
To park the machine, proceed as follows :
- Lower parking stand (N) into the vertical position and lock it in place with handle (Y) (photo 19).
- Lower the tractor’s 3-point hitch until the machine rests on parking stand (N) and the wheels.
- Disconnect the machine from the tractor.
- Place PTO shaft (T) into its support (C) (photo 19).
- Disconnect plug (H) of the lighting equipment and male couplings (F) of the hydraulic system and put them in the
holes provided (photo 19).