FC2860-3160-3560 TLR/TLS
18
4. - Safety
KN282CGB_A
Mower conditioner
4.2.7 Hydraulic circuit
Caution! The hydraulic circuit is under high
pressure. Maximum pressure at work: 200 bar.
- Before connecting hoses to the tractor hydraulics,
ensure that tractor and machine circuits are not
under pressure. Before disconnecting a hose,
depressurize the hydraulic circuit.
- To avoid making incorrect connections, mark
hydraulic couplers and corresponding hoses with
colors. WARNING! Functions could be reversed
(for example: lift/lower) and cause accidents.
- Regularly make visual inspection to check if
hydraulic hoses are damaged or worn. In case of
normal wear, the hydraulic hoses must be
replaced every 5 years. Damaged or worn hoses
must immediately be replaced. When replacing the
hydraulic hoses, only use hoses with the
specification recommended by the manufacturer of
the machine.
- To locate a leak, use appropriate means. Protect
body and hands from liquid under pressure.
- Any liquid under pressure (particularly oil from
hydraulics) can penetrate the skin and cause
severe injury. If injured, see a doctor immediately,
there could be danger of infection.
- Before any adjustments, maintenance or repairs
are carried out, lower the machine to the ground,
depressurize the hydraulics, turn off the engine,
remove ignition key and wait until all moving parts
have come to a complete stop.
4.2.8 Remote controlled components
- Danger of crushing and shearing can exist when
components are operated by hydraulic or
pneumatic controls. Keep away from these danger
zones.
Summary of Contents for FC2860 TLR
Page 2: ......
