- 16 -
ASSEMBLY INSTRUCTION
S
1° Assembling the pivoting cylinder and
the safety breakaway
(photo 1)
Fix the pivoting cylinder (1) onto the frame (2) using pin
(3) and 2 roll pins (4) (diameter 6 x 40). Insert the
cylinder guard (5) plain washer (6) (diameter 30.5 x 50
x 2) between the upper roll pin (4) and the mounting
yoke (see photo 1).
Fix the safety breakaway (7) onto the main frame (8)
using pin (9), 2 plain washers (10) (diameter 23 x 40 x
7) and 2 roll pins (11) (diameter 6 x 36). Insert the chain
end (12) between the lower roll pin (11) and the
mounting yoke (see photo 1).
2° Assembling the frame onto the cutting/
conditioning unit
(photo 2)
Check that the nylon bush bore is clean and well
greased. Remove the protection paint on the mating
area of the gear housing front cover. Fix the frame to the
cutting/conditioning unit using 2 self locking screws
(B) (M 16 x 50) and 2 washers (A) (diameter 17 x 61 x
8) as illustrated in photo 2.
Torque :
30 daNm / 220 ft.lbs
.
FOR SAFETY, PLACE WEDGES
UNDER THE MACHINE.
3° Assembling the compensating spring
rod housing
(photo 3)
Using a chain hoist or a fork lift truck slightly raise the
frame and lower the parking stand.
Then lower the unit so that the weight of the 3-point
frame rests on the parking stand.
Link the rod (13) to the upper frame casting (14) using
pin (15) and 2 roll pins (16) (diameter 8 x 45).
