- 19 -
8° Fitting the secondary PTO trans-
mission shaft
Connect the secondary PTO transmission shaft (46) to
the conditioning rotor input shaft and fix the protection
cover (47) on the flange (48) using a clamp collar (49)
(photo 10).
Note
: Position the cover (47) so that the opening (50)
for greasing the U-joint is pointing upwards
(photo 10).
According to the required conditioning rotor rotating
speed, connect the secondary PTO transmission
shaft (46) to the upper or lower output shaft of the
gearbox (photo 11) (see specific instructions page 33).
Link the safety chain (51) (photo 11). Fix the guard (52)
in front of the output shaft not being used using a wing
nut (53) (photo 11).
9° Fixing the safety curtain retaining rod
(photo 12)
Fix the retaining rod (54) at the end of the frame (55)
using 2 original nuts and bolts (56) (photo 12).
