18
PROGRAMMING THE NUMBER OF ROWS.
Example: 12 rows
Press the Number of rows key
Press keys
or
Till the display indicates
Validate by pressing
Now you can start seeding with the help of the
CONTROLOR
control unit. Before you start, press keys
and
simultaneously.
The display will indicate
After starting to seed, if you do not press any key, the number of seeds/hectare will be displayed after a few seconds,
along with the seeds/hectare and the number of the controlled row.
NOTE:
An audio signal will be emitted till the number of seeds/hectare exceeds the set number of seeds minus 15%.
Example: if the setting is 95,000 seeds, a signal will be emitted as long as the displayed value is not greater than 81
(81,000 seeds).
NO SIGNAL IS EMITTED
if the set number of seeds is exceeded, regardless of the
overpopulation percentage (the display will indicate the seeded population).
Summary of Contents for CONTROLOR
Page 1: ...1 CONTROLOR 9CT504 GB 03 2003 INSTRUCTIONS MANUAL...
Page 25: ...25 CONTROLOR WIRING DIAGRAM Shunt...
Page 29: ...29...
