coolant. Dispose of the coolant according
to your local guidelines and the
manufacturer's data sheet.
Disassemble all components according to
their recyclablility and dispose of them
adequately and lawfully.
such as rare earths, or may be reusable. Do
not waste them by inadequate and
thoughtless disposal.
On demand maintenance
The HT500 3D Printer features a low-
maintenance design, thus intensive
maintenance time is not required during normal
operation. Nonetheless regard the
maintenance
intervals
stated in the
Service Guide
.
Apart from this,
regular cleaning
will mostly
suffice to keep your 3D Printer running
satisfactorily.
In case of faults, refer to the
Troubleshooting
Guide
and the
Service Guide
where most
problems known to us and according remedies
are lodged.
INFO
If you encounter and/or solve problems
nowhere to be found in the troubleshooting
guide, you are welcome to inform us and
we will gladly add your experience.
Imprint
Kühling&Kühling GmbH
Christianspries 30
24159 Kiel
Deutschland
E-Mail: offi[email protected]
Tel.: +49 (0) 431 98 35 24 73
Local Court: Amtsgericht Kiel
Commercial Register No.: HRB 17535
Managing Directors: Jonas Kühling, Simon Kühling, Karsten Wenige
VAT Reg.No.: DE305873054
