Kugerr D100 60, Instructions For Installation And Use Manual

Page: 42 / 52

41
If the chimney hole is smaller than the 150 mm diameter pipe you are using, you can make the
connection using the adapter provided with the cooker hood. In this case, follow the steps below.
First, fix the 150 mm diameter pipe to the motor
outlet of the cooker hood using the plastic clamps
that are provided with the product.
Figure 1
Figure 2
Fix the adapter to the other tip of the pipe. Use
tape to strengthen the connection.
Mount the pipe in the chimney hole.
Figure 3
ATTENTION: For KÜGERR cooker hoods to perform optimally, the ideal standard for the
chimney hole and the external duct diameter is 150 mm. Using an exhaust duct with 120
mm diameter (or smaller) is not ideal and will lead to suboptimal cooker hood
performance, including increased noise. If you are using an exhaust duct with a diameter
of less than 150 mm, we recommend that you remove the exhaust vent attached to the
duct and leave the exit hole uncovered (when permitted).