42
When the Narrow Part of the Special Adapter Does Not Fit Into the Chimney Hole:
This means that the diameter of the hole of your kitchen chimney is not compatible with legal
standards, which set 120 mm diameter as a minimum. When pipes under 150 mm diameter are used,
this may increase the noise level of the cooker hood and reduce its suction power.
For optimal noise reduction and suction, ensure that the chimney hole is at least 120 mm in diameter
and is connected to a 150 mm diameter pipe.
If you use a pipe narrower than 150 mm in diameter, as
shown in the adjacent image, connect the adapter
directly to the motor outlet of the cooker hood. For fixing
the pipe, use the plastic clamps that are provided with
the product.
Note: Types of pipes that are more flexible can have a negative
impact on the noise level of the product. Use of semi-flexible
aluminum pipe is recommended.
CHIMNEY CONNECTION FOR MODELS A100 AND A200
Ideal pipe diameter for A100 and A200 models is 120 mm. Do not use pipes with diameters smaller or
larger than this.
The chimney hole should be at least 120 mm or 150 mm in diameter. This is mandatory and applies to
all brands. Refrain from connections with chimney holes smaller than this diameter as it may increase
noise levels and decrease the suction power.
Make the pipe connection as shown in the figure.
For attaching the pipe, use the plastic clamps that are provided with the product.
Summary of Contents for D100 60
