Kugelmann K-TRONIC 2, Original Operating Instructions

Page: 96 / 150

// ORIGINAL OPERATING INSTRUCTIONS
Operating instructions 11/15/2016 96/150
– Activation in user menu (see Chapter
8.9.1 "Configuration of output counter",
page 77
).
– Output counter is shown in the main display (see Chapter
8.9 "Output
counter", page 76
).
•
Show output counter as a sum (left+right):
– The output counters of the right and left chamber are added and shown in the
middle of the main display.
•
Motor unit:
– Optional - diesel or petrol engine (see Chapter
9.5 "Motor unit", page 141
).
•
Brine equipment:
– At carrier vehicles with optional pre-wetted salt equipment (see Chapter
9.4.1
"Configuration of brine equipment", page 132
).
•
Adjustment of spread pattern available:
– At spreaders with electrical adjustment of spreading pattern (see Chapter
9.1
"Electrical adjustment of spread pattern", page 114
).
•
Disc stop at pause:
– Spreading disc will stop as soon as the PAUSE button is pressed.
•
Disc stop at vehicle standstill:
– The spreading disc will stop as soon as the carrier vehicle stands still and no
speed signal is passed on the control system.
•
Speed when spreader stops:
– See Chapter
8.18 "Speed when spreader stops", page 100
•
Function key setting:
– See Chapter
8.3 "Function key setting", page 64
•
Electrical monitoring of spreading process:
– See Chapter
9.3 "Electrical monitoring of spreading process", page 131
•
Log:
– With this log, a spreading protocol can be retrieved via the serial interface
RS232.
•
Speed message:
– Warning if set speed is exceeded.
•
Standstill message:
– Warning in case of speed signal failure.
•
Input functions: