Kugelmann K-TRONIC 2, Original Operating Instructions, Page: 129 / 150

// ORIGINAL OPERATING INSTRUCTIONS
Operating instructions - Options 11/15/2016 129/150
1 0
The spreading operation will start by pressing and
holding down the spreading button.
Spreading may be effected as long as required.
1 1 After releasing the spreading button, spreading will finish.
1 2
Now, the produced spreading image can be measured and compared with
the values (in this example symmetrically 2,5 m (right) and 2,5 m (left)).
1 3
By turning the respective rotary control, the result
can be influenced.
•
If the number is turned larger (in this example:
>100) the spreading image is shifted to the
right
•
If the number is turned smaller (in this
example: >100) the spreading image is shifted
to the left
1 4
Repeat this procedure for
the left and the right side and all used
spreading materials. wiederholen.
•
In this example, the symmetry axis (middle axis) is shifted by 2,0 m to
the left and 1,0 m to the right respectively.
1 5
“Automatic spreading image” is configured according to these settings and
can be used.