SHOWER CONTROL POSITION
Run data cable to recommended
position as shown
Note: all dimensions are from
base of tray to centre of holes
(unless stated otherwise)
Kudos Concept tray height = 100mm
Kudos Concept2 tray height = 55mm
FLEXIBLE HOSE CONNECTION
THIS CONNECTION MUST BE CARRIED OUT AT THIS STAGE IF IT IS NOT POSSIBLE TO MAKE THE
CONNECTION AFTER THE SHOWER TRAY HAS BEEN INSTALLED
SHOWER TRAY INSTALLATION
For general information
, please read ‘Fixing Instructions for Shower Base’ (supplied with the tray), in conjunction
with these instructions.
CHECK TRAY
Ensure you have the correct tray to suit your installation
UNDER-TRAY WATER SUPPLY
OVERHEAD WATER SUPPLY
Connect 2 metre long flexible hose to mixed water outlet on Quartz Processor unit, either:
11
12
A - Directly, if unit is within reach
B - Via 15mm copper pipe, if unit is not within reach
IMPORTANT: please take note of dimensions for exposed hose, if not
adhered to, connection with the Water Outlet Body, at a later stage,
will not be possible.
13
14
RECESS
LOCATION BUSH FOR
CURVED GLASS PANEL
CORNER
LOCATION BUSH FOR
CURVED GLASS PANEL
LEFT-HAND ACCESS TRAY
RECESS
LOCATION BUSH FOR
CURVED GLASS PANEL
CORNER
LOCATION BUSH FOR
CURVED GLASS PANEL
RIGHT-HAND ACCESS TRAY
(1400)
798mm
543mm
(1400)
1
150mm
from top of tray
Recommended position
for data cable outlet
Outlet hole for
under-tray
water supply
1050mm
(1400 tray)
1250mm
(1700 tray)
978mm
(1700)
535mm
(1700)
RIGHT HAND ACCESS TRAY
1
150mm
from top of tray
Recommended position
for data cable outlet
Outlet hole for
under-tray
water supply
LEFT-HAND ACCESS TRAY
1050mm
(1400 tray)
1250mm
(1700 tray)
(1400)
543mm
(1700)
535mm
(1400)
798mm
978mm
(1700)
IMPORTANT
Ensure flexible hose
is not kinked during
installation process