Kubota RTV-X900G, Operator'S Manual

Page: 104 / 126

PERIODIC SERVICE 82
ENGLISH
B Changing Engine Oil
To avoid serious injury:
A
Be sure to stop the engine before changing the
oil.
A
Allow engine to cool down sufficiently, oil can
be hot and can burn.
1. Park the vehicle on a level surface.
2. Raise the cargo bed and mount the safety support.
3. Stop the engine.
4. Remove the rear skid plate.
5. To drain the used oil, remove the drain plug at the
bottom of the engine and completely drain the oil into
an oil pan.
All the used oil can be drained out easily when the
engine is still warm.
6. After draining, reinstall the drain plug.
7. Fill with the new oil up to the upper line on the dipstick.
(See "LUBRICANTS, FUEL AND COOLANT" in
"MAINTENANCE" section.)
8. Properly dispose of used oil.
Oil capacity RTV-X900
[Filter exchanged]
3.1 L
[Filter non-exchanged]
2.7 L
(1) Oil inlet
(2) Dipstick (A) Oil level is acceptable within this range.
(1) Rear skid plate
(1) Drain plug