Kubota RTV-X900G, Operator'S Manual

Page: 90 / 126

PERIODIC SERVICE 68
ENGLISH
B Checking Brake Fluid Level
To avoid serious injury:
A
Never operate the vehicle, if the brake fluid is
below the "MIN" mark.
A
Use only KUBOTA DOT3 GENUINE BRAKE
FLUID from a sealed container. Using other
type of oil ruins synthetic resin or rubber
installed in brake system components, and
may cause brake failure.
A Avoid contamination of the brake fluid.
Thoroughly clean area around the filler cap
before removing. Do not open the brake fluid
reservoir cap unless absolutely necessary.
A Use extreme care when filling the reservoir. If
brake fluid is spilled on the power steering
hose, wash off with water immediately. Brake
fluid quickly ruins synthetic resin or rubber
hoses.
1. Park the vehicle on a level surface.
2. Open the hood.
3. Check to see that the brake fluid level is between the
"MAX" and "MIN" marks.
4. If it is below the "MIN" mark, add brake fluid to the
"MAX" mark.
B Checking Brake Pedal
To avoid serious injury:
A
Stop the engine and chock the wheels before
checking brake pedal.
1. Inspect the brake pedals for free travel, and smooth
operation.
2. Adjust if incorrect measurement is found: (See
"Checking Brake Pedal" in "EVERY 200 HOURS" in
"PERIODIC SERVICE" section.)
(1) Oil tank (A) "MAX"
(B) "MIN"
(1) Brake pedal (A) "FREE TRAVEL"
(B) "PEDAL STROKE"