manualshive.com logo in svg

Kubota RT105M, Operator'S Manual, Page: 15 / 183

Share
Download
Kubota RT105M Operator'S Manual Download Page 15

Safety - 14

RT105M Operator’s Manual

Emergency Procedures

If an Electric Line is Damaged

If you suspect an electric line has been damaged and you are on tractor, DO NOT MOVE. Remain on 
tractor and take the following actions. The order and degree of action will depend upon the situation.

•

Warn people nearby that an electric strike has occurred. Instruct them to leave the area and contact 
utility.

•

Raise attachments and drive from immediate area.

•

Contact utility company to shut off power.

•

Do not return to jobsite or allow anyone into area until given permission by utility company.

If you suspect an electric line has been damaged and you are 

off tractor

, DO NOT TOUCH TRACTOR. 

Take the following actions. The order and degree of action will depend upon the situation.

•

LEAVE AREA. The ground surface may be electrified, so take small steps with feet close together to 
reduce the hazard of being shocked from one foot to the other. For more information, contact your 
Ditch Witch

®

 dealer. 

•

Contact utility company to shut off power.

•

Do not return to jobsite or allow anyone into area until given permission by utility company.

Summary of Contents for RT105M
























































































































































































Reviews:

No comments