manualshive.com logo in svg

Kubota RA2584, Operator'S Manual

Share
Download
Kubota RA2584 Operator'S Manual Download Page 91

Additional equipment

91

Additional equipment

Additional 

equipment

The following additional equipment is available for this machine. All 
items of additional equipment are original parts, and are available from 
your dealer. 

Additional equipment which is not part of the standard scope of delivery 
is indicated by a plus symbol [+] in this manual.

Tine saver [+]

If the tines are broken, the tine saver can prevent the broken-off part 
from being lost. Any following machines, for example straw cutters, 
are then not damaged by lost tines in the crop. Observe the separate 
assembly instructions.

For a good swath deposit, both tine legs must run parallel to one an-
other after the tine savers have been fitted.

Fit one tine saver on each tine.

Visually check that both tine legs run parallel to each other..

Electro-hydraulic 

single lift +]

The optional electro-hydraulic single lift makes it possible to deposit the 
crop using either the right or left rotor.

Tandem axles [+]

The optional tandem axles make for better contours. Note: the wide 
track is in front.

The tandem axles replace the rear running wheels. Separate 
assembly instructions are supplied. 

Tine saver

Tine leg

Direction of rotation of the rotor

Pilotbox

Tandem axle

Summary of Contents for RA2584





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands