manualshive.com logo in svg

Kubota RA2584, Operator'S Manual

Share
Download
Kubota RA2584 Operator'S Manual Download Page 13

Safety

13

PTO shaft speed 540 rpm

The specified maximum PTO shaft speed of 540 rpm must not be 
exceeded. A higher PTO shaft speed will damage the machine.

Only use the PTO shaft specified

Only use PTO shafts which have been specified by the manufacturer. 
Other PTO shafts with disconnect couplings may allow higher 
disconnect torques. Higher disconnect torques may damage the 
machine.

Unrestricted field of vision to the rear

After it has been coupled, ensure that you have an unrestricted view 
of the machine, in both its work and transport positions. At the very 
least, use the panorama mirror provided by the tractor manufacturer. 
Otherwise, hazardous situations may not be detected in time, and 
accidents or damage may be caused as a result. 

Check the angle of lock

On machines with attachment carriers, an angle of lock of 90° is 
possible. This angle must not be exceeded. Otherwise, damage to the 
PTO shaft may be caused as a result.

Summary of Contents for RA2584





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands