Road transport
52
Prior to road
transport
When driving on public roads, the machine must be in the transport
position. To prepare the machine for road transport, carry out the
following steps:
»Setting the lowest transport height«
»Folding in the deflector bar«
»Place tine supports in transport holder«
»Fold the machine into the transport position«
Move the machine onto ground that is as flat as possible before
changing from the working to the transport position.
Setting the lowest
transport height
Raise the machine into the headland position using the single-
acting hydraulic control device in the tractor.
Adjust the swath to the smallest width using the double-acting
hydraulic control device in the tractor.
Folding in the
deflector bar
Before removing the tine supports, move all protective devices around
the rotors from transport to work position, and lock them in place. Fold
in the deflector bar as follows:
Lower the machine to the work position using the single-acting
hydraulic control device.
Switch off the tractor and secure it.
Release the deflector bar by pulling it out of the latch for the work
position.
Fold the deflector bar through 180° and engage it in the latch for
the transport position.
1
2
3
Latch for work
position
Latch for transport
position
Deflector bar
Summary of Contents for RA2584
Page 98: ...EC Conformity Declaration 98 ...
