manualshive.com logo in svg

Kubota RA2584, Operator'S Manual

Share
Download
Kubota RA2584 Operator'S Manual Download Page 60

Preparations on the field

60

Folding the 

machine into the

work position

After road transport, the machine is brought into the work position on 
the field. Follow the handling instructions below:

Shutting the machine 

down

Place the machine onto ground that is as flat as possible.

Secure the tractor against rolling away, shut off the engine and 
remove the ignition key.

Removing the tine 

covers

Remove the 6 tine covers and place them in the 2 holders to the 
left and right of the main frame.

Secure the tine covers in the holder. Do so by inserting the safety 
splint, which is attached to the holder, through the eye bolt on the 
holder.

Tine cover holder

Firmly secure the accessories

Accessories not in use must always be stowed and secured in the 
holders provided. When the machine is in motion, unsecured 
accessories can come loose. Damage to the machine and serious 
or fatal injury may be caused as a result.

Summary of Contents for RA2584





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands