23
OPERATING THE ENGINE
C
Check Easy Checker(TM) Lamps
1. When the key is turned "ON", indicators(1)(3) should
come on. If trouble should occur at any location while
the engine is running, the indicator corresponding to
that location comes on.
2. Suppose that the engine coolant temperature is not
high enough yet. Glow plug indicator(4) also comes on
when the key is turned "ON" to preheat the engine and
goes off automatically when preheat is completed.
Illumination time of indicator varies according to the
temperature of coolant.
3. The parking brake indicator(2) comes on while parking
brake is applied and goes off when it is released.
A
Daily checks with the Easy Checker(TM) only, are not
sufficient. Never fail to conduct daily checks carefully
by referring to Daily Check. (See "DAILY CHECK" in
"PERIODIC SERVICE" section.)
A
Some of the Easy Checker(TM) lamps may light up
depending on the positions of the levers and switches.
A
Turn on the key, and some of the indicators stay on
about 1 second.
[Manual Transmission Type]
6. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever
(2) Foot throttle
[except HST Type]
"INCREASE"
"DECREASE"
7. Insert the key into the key switch and
turn it "ON".
"OFF"
"ON"
"START"
(1) Electrical charge indicator
(2) Parking brake indicator
(3) Engine oil pressure indicator
(4) Glow plug indicator
8. Fully depress the clutch pedal.
0000012651.book Page 23 Thursday, October 1, 2015 3:53 PM
