33
OPERATING THE TRACTOR
[Manual Transmission Type]
By combination of using the main gear shift lever, the
range gear shift lever and synchro-shuttle shift lever,
forward speeds and reverse speeds shown in the table
below are obtained.
B
Main Gear Shift Lever
The main gear shift is partially synchronized allowing to
shift on the go between 3rd and 4th speeds.
Just depress the clutch and shift, coming to a complete
stop is not necessary.
When changing between 1st and 2nd speeds, depress
the clutch and stop the tractor before shifting.
A
To avoid transmission damage, depress clutch pedal
and stop the tractor before shifting 1st or 2nd speeds.
A
For road travel, start the tractor in a lower gear (6th
and 7th), and then shift to a higher gear (7th and 8th).
This will prolong the service life of clutch.
B
Range Gear Shift Lever
The range gear shift can only be shifted when the tractor
is completely stopped and the clutch is depressed.
A
To avoid transmission damage, depress clutch pedal
and stop the tractor before shifting between ranges.
6. Selecting the Travel Speed.
(1) Synchro-shuttle shift lever
(2) Main gear shift lever
(3) Range gear shift lever
(4) Front wheel drive lever [4WD]
(F) "FORWARD"
(N) "NEUTRAL POSITION"
(R) "REVERSE"
"LOW"
"HIGH"
Standard model
8 forward speeds
8 reverse speeds
HST
MT
0000012651.book Page 33 Thursday, October 1, 2015 3:53 PM
