manualshive.com logo in svg

Kubota LA344, Workshop Manual

The Kubota LA344 Workshop Manual is a comprehensive guide for users of the Kubota LA344 Front Loader. This manual provides detailed instructions and diagrams to ensure proper maintenance and operation of the product. Download this invaluable resource for free at manualshive.com and unlock the full potential of your Kubota LA344.

Share
Download
background image

CONTENTS

1. INFORMATION

SAFETY FIRST..................................................................................................................................................1-1

1. Before you start service............................................................................................................................1-1
2. Start safely................................................................................................................................................1-1
3. Operate safely ..........................................................................................................................................1-2
4. Prevent a fire ............................................................................................................................................1-2
5. Keep a good airflow in the work area .......................................................................................................1-3
6. Discard fluids correctly .............................................................................................................................1-3
7. Prevent acid burns....................................................................................................................................1-3
8. Prepare for emergencies ..........................................................................................................................1-3

SAFETY DECALS..............................................................................................................................................1-5

1. Safety decals ............................................................................................................................................1-5
2. Care of danger, warning, and caution labels ............................................................................................1-8

TERMINOLOGY.................................................................................................................................................1-9

1. Loader terminology...................................................................................................................................1-9

SPECIFICATIONS ........................................................................................................................................... 1-11

1. Specifications for loader ......................................................................................................................... 1-11
2. Specifications for bucket......................................................................................................................... 1-11
3. Dimensional specifications .....................................................................................................................1-12
4. Operational specifications ......................................................................................................................1-13

2. GENERAL

IDENTIFICATION...............................................................................................................................................2-1

1. Loader identification .................................................................................................................................2-1

GENERAL PRECAUTIONS ...............................................................................................................................2-3
LUBRICATING SYSTEM ...................................................................................................................................2-5

1. Lubricants .................................................................................................................................................2-5

TIGHTENING TORQUES ..................................................................................................................................2-7

1. General use screws, bolts, and nuts ........................................................................................................2-7
2. Stud bolts..................................................................................................................................................2-7
3. American standard screws, bolts and nuts with UNC or UNF threads ..................................................... 2-8
4. Plugs and grease fittings ..........................................................................................................................2-8
5. Hydraulic fittings .......................................................................................................................................2-9

5.1 Adapters, elbows and others.............................................................................................................2-9

MAINTENANCE CHECK LIST......................................................................................................................... 2-11

1. Loader service intervals.......................................................................................................................... 2-11

CHECK AND MAINTENANCE.........................................................................................................................2-13

1. Lubricating loader ...................................................................................................................................2-13
2. Re-tightening main frame bolt and nut ...................................................................................................2-13
3. Daily checking the loader .......................................................................................................................2-13
4. Check points of every 50 hours ..............................................................................................................2-14

4.1 Precautions for checking torque of bolt and nut of main frame.......................................................2-14

SPECIAL TOOLS.............................................................................................................................................2-15

1. Special tools for loader ...........................................................................................................................2-15

1.1 Sliding jig and correcting jig ............................................................................................................2-15

3. FRONT LOADER

MECHANISM .....................................................................................................................................................3-1

1. Hydraulic circuit ........................................................................................................................................3-1
2. Front remote hydraulic control system (if equipped) ................................................................................3-3

2.1 Operating control lever......................................................................................................................3-3

3. Boom cylinder and bucket cylinder...........................................................................................................3-4

3.1 Structure of boom cylinder and bucket cylinder ................................................................................3-4

4. One touch front loader..............................................................................................................................3-5

4.1 Outline of one touch front loader.......................................................................................................3-5

LA344, LA344S

i

KiSC issued 02, 2017 A

Summary of Contents for LA344











































































Reviews:

No comments

Related manuals for LA344

Brands by name

Popular brands

Load more brands