Kubota L47TL, Operator'S Manual

Page: 98 / 159

3-POINT HITCH & DRAWBAR 72
3-POINT HITCH (if equipped)
B
Selecting Category
[L47]
L47 has category 1 only.
[M62]
M62 has category 1 & 2.
This three-point hitch can be used for both category 1 and
2 implements.
[Category 1 type]
[Category 2 type]
B
Selecting the Top Link Mounting Holes
Select the proper set of holes by referring to the
"Hydraulic Control Unit Use Reference Chart" in
"HYDRAULIC UNIT" section.
B
Drawbar (if equipped)
Remove the drawbar if close mounted implement is being
attached.
A When installing the drawbar frame, be sure to remove
the plate first.
1. Make preparations for attaching
implement.
(1) Top link
(2) Lower link
(3) Top link rear pin
(4) Lynch pin
(5) Top link collar
(6) Lower link collar
(7) Top link rear pin assy (A) 19.3 mm I.D.
(B) 25.7 mm I.D.
(C) Tractor side
(D) Implement side
(1) Plate (Do not use)
(2) Brake support
(3) Transmission case
(4) Drawbar
(5) Drawbar frame