Kubota L47TL, Operator'S Manual

Page: 113 / 159

87 TIRES, WHEELS AND BALLAST
TIRES, WHEELS AND BALLAST
TIRES
To avoid personal injury or death:
A
Do not attempt to mount a tire on a rim. This
should be done by a qualified person with the
proper equipment.
A
Always maintain the correct tire pressure.
Do not inflate tires above the recommended
pressure shown in the operator's manual.
A
Do not use tires larger than specified.
A When you intend to mount different size of tires from
equipped ones, consult your dealer about front drive
gear ratio for detail.
Excessive wear of tires may occur due to improper
gear ratio.
B
Inflation Pressure
Though the tire pressure is factory-set to the prescribed
level, it naturally drops slowly in the course of time. Thus,
check it everyday and inflate as necessary.
B Treads
[L47]
A
Front wheel and Rear wheel
Models (Tire sizes) Inflation Pressure
Front
L47
27 x 10.5-15R4
275 kPa (2.8 kgf/cm , 40 psi)
M62
10-16.5R4
275 kPa (2.8 kgf/cm , 40 psi)
Rear
L47
15-19.5R4
207 kPa (2.1 kgf/cm , 30 psi)
M62
17.5L-24R4
207 kPa (2.1 kgf/cm , 30 psi)
(1) Nut
Front (185 N-m, 136 ft-lbs)
Rear (260 N-m, 192 ft-lbs)