Kubota L4701, Operator'S Manual

Page: 86 / 142

4. Hydraulic control unit use reference chart
In order to use the hydraulics properly, the operator must know the following chart. Though this information may not
be applicable to all types of implements and soil conditions, it is useful for general conditions.
Implement
Soil condition
With position control
With draft control (if draft
control lever is equipped)
Gauge wheel (1) Telescopic
stabilizers
Remarks
Top link
mounting
holes
(1) position
control
lever
Top link
mounting
holes
(1) position
control
lever
(2) Draft con-
trol lever
Moldboard
plow
Light soil 1 or 2
Position control
1 or 2
Draft and
Mixed control
Yes/no Loose
Insert the set-
pin through the
slot on the out-
er tube that
align with one
of the holes on
the inner bar.
For implements
with gauge
wheels, lower
the position
control lever all
way.
Medium soil 2 or 3 2 or 3
Heavy soil 3 3
Disc plow - 2 or 3 2 or 3
Place the draft-
control-lever to
the suitable po-
sition and set
the implement
pull with the
position-con-
trol-lever
Harrower
(spike, spring-
tooth, and disc
type)
--- 2 or 3 2 or 3
Sub-soiler
Weeder and
ridger
--- 3 4
Position control Yes
Tighten
Telescopic sta-
bilizer should
be tight enough
to prevent ex-
cessive imple-
ment move-
ment when im-
plement is in
raised position.
Earthmover,
digger, scraper,
manure fork,
and rear carrier
Hold the draft-
control-lever at
the most front
position during
operation.
Yes/no
Mower (mid
mount type and
rear mount
type)
No
HYDRAULIC UNIT REMOTE HYDRAULIC CONTROL SYSTEM (IF EQUIPPED)
82
L4701