Kubota L4701, Operator'S Manual

Page: 118 / 142

3. Turn the tie-rod joint to adjust the length of tie rod
until the proper toe-in measurement is obtained.
4. Retighten the tie-rod nut.
5. Attach the snap ring of the tie-rod joint.
(1) Snap ring
(2) Tie-rod nut (3) Tie-rod joint
Tie-rod nut (2)
Tightening
torque
83.3 N ⋅ m to 88.2 N ⋅ m
(8.5 kgf
⋅
m to 9.0 kgf
⋅
m)
[61.4 ft ⋅ lbs to 65 ft ⋅ lbs]
2.2 Adjusting the toe-in [4WD]
1. Loosen the tie-rod nuts.
2. Turn the tie-rod joint to adjust the length of tie rod
until the proper toe-in measurement is obtained.
3. Retighten the tie-rod nuts.
(1) Tie-rod nut (2) Tie-rod joint
Tie-rod nut (1)
Tightening
torque
167 N
⋅
m to 196 N
⋅
m
(17 kgf ⋅ m to 20 kgf ⋅ m)
[123.2ft
⋅
lbs to 144.6 ft
⋅
lbs]
SERVICE EVERY 400 HOURS
1. Changing the engine oil
WARNING
To avoid personal injury or death:
• Be sure to stop the engine and remove the
starter key before changing the engine oil.
• Allow the engine to cool down sufficiently
because the engine oil can be hot and can burn.
1. To drain the used engine oil, remove the drain plug
at the bottom of the engine and drain the engine oil
completely into the oil pan.
2. After draining the engine oil, reinstall the drain plug.
PERIODIC SERVICE SERVICE EVERY 200 HOURS
114
L4701