2. Lubricating the grease fittings
[4WD]
1. Apply a small amount of multipurpose grease to the
following points every 50 hours.
If you have operated the machine in extremely wet
and muddy conditions, lubricate the grease fittings
more often.
(1) Grease fitting (top link)
(2) Grease fitting (lifting rod)
[RH]
(3) Grease fitting (top link brack-
et with draft control)(if equip-
ped)
(4) Grease fitting (hydraulic arm
axle)
(5) Battery terminals
(6) Grease fitting (tie-rod ends)
2. When applying the grease to the both front-axle-
supports, apply grease until the grease overflows
from the breather port.
(1) Grease fitting (front axle sup-
port)
(2) Breather
PERIODIC SERVICE
SERVICE EVERY 50 HOURS
106
L4701
Summary of Contents for L4701
