Maintenance
97
Do not open the radiator cap while the engine is still
hot, risk of scalding.
•
Remove the radiator cap (1) by turning it anticlockwise.
•
The coolant level should reach the MAX. mark (see figure);
if not, add coolant.
•
Refit the radiator cap and close the expansion reservoir.
•
Close the engine compartment cover.
•
If required, install the right side panel.
Cleaning the radiator
•
Open the engine compartment cover (page 82).
•
Clean the radiator (1 and 2) from the engine side with a
water jet or with compressed air. Do not use high-pressure
cleaners.
•
Pay particular attention to the space (3) between the radia-
tor and oil cooler, as leaves tend to collect here.
If required, remove the side panel (page 83).
•
Check the radiator for damage after cleaning it.
•
Close the engine compartment cover.
Checking and adjusting the V-belt tension
•
Open the engine compartment cover (page 82).
•
Depress the V-belt (1) at point "A". The V-belt deflection
should be approx. 10 mm.
•
Check the V-belt for proper condition and cracks.
•
To tighten the V-belt, loosen the mounting screws (2 and 4),
swing the alternator (3). Tighten the fastening screws and
check the tension of the V-belt.
•
Close the engine compartment cover.