Operation
81
Replacing the fuses
Defective fuses may only be replaced with fuses of the same type and same rating.
The bypassing of fuses, for example by a wire, is not allowed.
If the malfunction can not be remedied by replacing
the fuse, or if the fuse blows again when starting,
contact skilled personnel.
The fuse layout of the fuse box with their rating is
indicated on the cover (1) below the operator's
seat.
The excavator's main fuse is positioned next to the battery, and the alternator circuit fuse is
mounted in the engine compartment in front of the alternator.
•
Unlock the cover (figure above, position 1) and lower it down.
•
Remove the defective fuse from the fuse box (1) and re-
place it.
•
The fuse layout is shown in the next figure.
•
The main fuse (3) is positioned above the battery and the
alternator circuit fuse (2) beside the fuse box.
