Accessories
136
KUBOTA overload warning function
An overload warning function informs the operator immediately if there is an overload. The warning system is
controlled by the pressure switch at the pipe safety valve. The load is measured by the pressure at the base of
the cylinder. Any overpressure triggers the warning device.
The warning device is activated with the warning device rocker
switch (1). In the event of an overload, an acoustic signal sounds
and the warning light (2) flashes.
Excavators that will be used in the lifting operation, must be
equipped with at least a pipe safety valve on the boom and arm,
together with an overload warning function according to
EN 474-5.
An additional pipe safety valve in accordance with EN 474-1
must be installed before using the dozer for lifting operation
support.
To equip the excavator for the lifting operation, contact your
KUBOTA specialist dealer.
When changing from rubber crawlers to steel crawlers, or from
steel crawlers to rubber crawlers, or when modyfing the length of
the arm, please contact your KUBOTA dealer.
The overload warning function must be enabled during any lifting operation to prevent personal
injuries and damage to equipment.
KUBOTA quick coupling systems and equipments
The quick coupling system is designed to be mounted with pins at the arm and the bucket linkage.
It is designed to receive KUBOTA bucket accessories only.
The related operating instructions are attached to the excavator's operating instructions.
For further information, please contact your KUBOTA dealer or authorized retailer.
The size, weight and arm bracket of the excavator are important factors in the selection of at-
tachments. These factors must be made known to the attachment manufacturer when ordering
attachments, and be observed by the operator when operating the excavator. Various attach-
ments are nevertheless of limited use only.
KUBOTA bucket accessories
For further bucket accessories, please contact your KUBOTA dealer or authorized retailer.
